Servicing & Repairs

Not only do we build some of the best bikes around, but we also offer the highest standard of servicing you will find for your bike.

With our fully equipped workshop, and expertly trained mechanic, we have the capacity to work on and prepare any bike, whether it be your daily training bike, winter steed, through to your race-day machine with Shimano Di2 or Campagnolo EPS drivetrain.

*Please call us at the shop to book an appointment for your service or repair before bringing your bike in*


Level 1 – Lube and Tune £40

Brake cables are adjusted and pads checked.
All drive components including pedals, chainset, bottom bracket, chain and both derailleurs are checked over for wear. Cables are adjusted and gears realigned.
Tyres are checked for wear and inflated to the correct pressure.
Headset and handlebar assembly are checked and tightened to the correct torque.
Saddle and seat post are checked and tightened to the correct torque.

The cost of any new components is not included in the price unless stated above.  There is no additional labour charge for the fitting of new brake pads, tubes and tyres supplied by us.

– add a drivetrain clean for £10


Level 2 – Full Service £65

Bike  is wiped down and checked over for damage and corrosion. All drive components including chainset, bottom bracket, chain and both derailleurs are cleaned removing all dirt. These parts are then fitted with fresh grease and new inner cables.
Brakes are removed, cleaned and checked for wear then fitted with new inner cables.
Tyres are checked for wear and inflated to the correct pressure.
Headset and handlebar assembly are tightened to the correct torque.
Seat post is removed, cleaned, greased and installed to the correct torque.

The cost of any new components is not included in the price unless stated above, however there will be no additional labour charge for the fitting of any new parts that need replacing if supplied by us.

-with disc brake bleed £80


Level 3 – Strip Down £115

Bike is stripped of all components and fork is removed. The frame and fork are washed clean and checked for damage and corrosion.
Seat post and saddle are removed, post is greased and both are fitted to the correct torque.
All drive components including pedals, chainset, bottom bracket, chain and both derailleurs are washed removing all dirt.  These parts are then fitted with fresh grease and new inner and outer cables.
Brakes are removed checked, cleaned and fitted with new inner and outer cables.
Wheels are cleaned, rims and bearings are checked for wear.  Wheels are trued and damaged spokes are replaced.
Tyres are checked for wear and inflated to the correct pressure – Includes new tubes if needed.
Headset is removed, bearings are cleaned and re-installed with fresh grease.
Handlebar assembly is stripped, cleaned, checked and fitted to the correct torque.
New bar tape included – Choice of tape available.

The cost of any new components is not included in the price unless stated above, however there will be no additional labour charge for the fitting of any parts that need replacing if supplied by us.


Advertisements